Buy Low Price From Here Now
Air conditioner support / No drilling of outside wall or siding / All necessary hardware included / Supports up to 80 lbs. / Fits walls 4"-11" thick Fits walls from 4 - 11 thick Two year limited warranty
Readmore
Technical Details
- Installs completely from inside- No drilling of outside wall or siding
- All necessary hardware included
- Rugged all weather construction
- Supports up to 80 lbs.
See more technical details
By Max Rockbin (Portland, OR)
The nice thing about this bracket is you can install it from inside without getting on a ladder.
The bad thing: It probably won't fit on your window.
The design requires that you have a window sill (not all windows have one) which extends for a certain length - not too much or too little from your outside wall. It also requires that your window not extend to high above the sill (vinyl windows have a border which seems to be too high).
You will be able to install the bracket. The problem is, the hinged support underneath won't reach your outside wall. Or, if it does, the angle will be too shallow to provide adequate support. Or you may get lucky.
I bought two of these and it wouldn't fit properly on either apartment where I tried to install it. (the fit is hard to explain, which is probably why they didn't).
They tried to make it adjustable. There are plastic spacers and multiple screw holes. They just did a poor job.
By Dmitriy Kamenev
Good product over all. The only bad thing, it is made to be installed on outer side of the window frame, but new windows unfortunately are not made this way.
By Christopher Papp
I used this product for 5,000 BTU Air Conditioners and it works well. The inserts make it adjustable and easy to fit in any window. The installation took a little planning, but it was not difficult. I have only casement windows in the living room so I have to remove the roll out part of the window to fit in a window air conditioner. I was able to use this mounting bracket on this as well. It's a lot better than damaging the window sill and having pieces of wood to support the A/C unit like I had to do last year. Overall, a great product that works well.
By olajoe (Aurora, CO)
Won't work with flush mounted windows unless you place a ledger outside and notch it to seat the cross piece. The design of this brace assumes the window has a sill. Once installed, it works but for windows without a sill be prepared with some tools, i.e., tape, power saw, and drill.
By Fancyness (Saratoga Springs, NY)
This product is great. I worried about having something to safely support our large ac and this does just fine. It is sturdy and easy to put up. The only complaint was having to spend the extra money after shelling out a couple hundred on the ac to begin with.
Images Product
Buy Outland A/C Mounting Bracket Now
Tidak ada komentar:
Posting Komentar